Environmentally friendly wetting agent EW-100
Product introduction：
EW-100 of APEO-free and VOC, biodegradable non-ionic surfactant, having a good surface activity and wetting properties, can significantly reduce the surface tension of water.
EW-100 can be widely used in water-based paint, water-based and water-based ink manufacturing paste formulations, is an excellent pigment wetting and paste, color development agent, while the paint substrate wetting also has a very big help.
EW-100 can also be used as various types of emulsifiers and emulsion stabilizers.
Product characteristics:
Of various inorganic and organic powder having excellent dispersibility surface wetting properties
Excellent environmental-friendly products, can be bio-degradable
Can improve the film variety of substrates the wettability of the
Helps to prevent exterior wall tinting system of's floating color, Flooding
Antifreeze dissolved excellent performance, good to help film-forming performance
Typical properties:
Appearance: colorless, transparent, semi-viscous liquid
Chemical characteristics: Non-ionic surfactant
Active content: 90%
pH: 6 to 7.5 (1% solution)
Specific gravity: 1.03 (25 ℃)
Instructions for use:
This product is often associated with the poly (meth) acrylate used together with a dispersant, may be synergistic with the maximum efficiency, it can improve the wettability of the film on the substrate adhesion is difficult, especially at low concentrations are particularly effective.
When preparing the base material of different coatings, water-based ink can be improved pigment wetting, thereby increasing the gloss, improved color strength, particularly suitable for organic pigments and carbon black toner places.
For the preparation of resin-free, solvent-free aqueous pigment paste, the displayed excellent wetting, dispersing performance, even at high pigment concentration in the system can also be given excellent fluidity paste. PH of the system used by the change of use of this product no significant effect on performance.
Packaging and storage:
Packing: 30kg plastic drum or 200kg plastic drum, the product should be confined conditions, in a cool, dry, ventilated warehouse storage, low temperature may have mild turbidity, slowly warming melting does not affect the normal use of the product, the product does not belong to hazardous chemicals, according to the transport of non-hazardous chemicals regulations.
Validity: the required storage conditions for one year.